Product Information

One: This is a membrane keyboard with 104 keys with wired USB interface, retro round key cap, and the hand feeling of mechanical keyboard.

Second: E-sports game chip, 26 keys without conflict.

Three: The keyboard has a variety of light modes to switch.

Four: Prevent splashing water, not afraid of water stains.

Instructions:

1. Unpack the product, remove the ribbon of the keyboard cable, and insert the cable into the USB port of the computer，insert the type-C interface of the other end into the keyboard

2. When using this keyboard for the first time, the system may need to install USB driver. At this time, the computer will automatically search for and install the keyboard driver

3 after the driver is installed, the keyboard can work normally

4 Press the light key on the keyboard to switch and switch the backlight

Notice

1. Wash your hands before using the keyboard to prevent sweat and bacteria from contaminating the keyboard. Washing hands after use can prevent contamination by bacteria on the keyboard.

2. The keyboard should be placed on a smooth desktop to avoid falling and soiling the keyboard.

3. Before using the keyboard, be sure to carefully check the instructions of the keyboard and operate according to the requirements and specifications in the instructions.

4. Other items should not be shelved on the keyboard to avoid damaging or soiling the keys.

5. When cleaning the keyboard, do not wash it directly with water. For non-waterproof keyboard, it may become invalid after washing.

6. Don't vent your emotions on the keyboard. The most common thing is to pat the keyboard hard when it crashes. On the one hand, it will reduce the service life of the keyboard; On the other hand, it will pat the sweat stains and dandruff in your hands on the keyboard.

FAQ

1: What kind of keyboard is this?

This is a membranekeyboard with104 keys, including many kinds of color matching

2：How to control the light of the keyboard?

There are instructions on the back of the keyboard as follows. 1: Press the second button on the right of FN + F12 on the right of the space bar, and the light will turn on and off. 2: Press the lower key of FN + direction key, and press the upper key of FN + direction key together to reduce and increase the light brightness. 3:FN + F12 press the first button on the right together, breathing light mode. 4: FN +(-or +) the two keys under F9 and F10 are slow and fast to adjust the breathing mode.

3.What's in the box?

Keyboard*1

manual*1

4.What should I do if I find that the key cap has fallen off after opening the package?

The keycap of the keyboard can be disassembled. During the transportation of the keyboard, the keycap may fall off due to Bumps. Find the falling keycap in the inner package and install it in the corresponding position. Generally, it can be used normally.